Shipfitter- MUST be eligible for DBIDS/NAVSEA Credentials

 ESSENTIAL DUTIES AND RESPONSIBILITIES

 Lay out and fabricate metal structural parts, for example plates, bulkheads, and frames, and braces them in position within hull of ship for riveting or welding

  • Lay out blueprints, checking and fitting materials, tack welding of small assemblies, aluminum and steel foundations and outfitting items
  • Lay out position of parts on metal, working from blueprints or templates and using scribe and hand tools.
  • Position parts in hull of ship, assisted by a rigger
    • Mark location of holes to be drilled and installs temporary fasteners to hold part in place for welding or riveting. Installs packing, gaskets, liners, and structural accessories and members, for example doors, hatches, brackets, and clips.
    • Install structural outfit items, doors, ladders, foundations
    • Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
    • Prepare molds and templates for fabrication of nonstandard parts
    • Shop and field fabrication
    • Adhere to industry codes, regulations and specifications
    • Tack welding
    • Install simple systems without templates and blueprints
      • Read and understand the Chemist and Competent Persons reports and determine if job sites, particularly those involving combustible material, are safe for personnel and hot work
      • Other duties as assigned
      • Understand and act upon instruction
      • Work independently to complete responsibilities
      • Must have regular, reliable attendance

TOOL REQUIREMENTS:

 Trade associated tools are expected to be provided and maintained by the employee.

 QUALIFICATIONS

  • Shipboard Shipfitting experience required
  • Knowledge of and ability to use hand tools and instruments associated with the Shipfitting trade
  • Must be able to work effectively with others
    • Must be able to comprehend complex structural assembly drawings, blueprints, and sketches includes weld symbols, material types, datum, and reference lines.
    • Ability to use Work Packages and Drawings to plan and execute work
    • Ability to use Molded Lines and Ship Reference Lines to execute required work
    • Ability to Erect, Set, and Makeup Complex-shaped Shell Plates

 

 Ability to Erect, Set, and Makeup Decks, Bulkheads, Longitudinals, trunks, etc.

    • Ability to Install and Replace Hull Inserts and Penetrations and Install Miscellaneous and Complex Foundations
    • Familiar with OSHA regulations relative to the shipbuilding industry

REASONABLE ACCOMMODATIONS STATEMENT

 To perform this job successfully, an individual must perform the essential job duties satisfactorily with or without reasonable accommodation and without posing a direct threat to the safety or health of employee or others. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform the essential functions.

 

 WORK ENVIRONMENT

Exposure to extreme weather conditions, dust, dirt, fumes, gases, smoke, and confined spaces.

 PHYSICAL DEMANDS

While performing the duties of this position, the employee is regularly required to:

  • Sit, Stand, Walk, Bend, Squat, Climb, Reach, Push and Pull, Stoop, Crawl, Kneel, Balance, Lift and Carry various objects and equipment
  • Use hands to handle and control objects and/or tools
  • Work in confined spaces such as boilers, tanks and voids
  • Access areas of facility and vessels by inclined and vertical ladders
  • Hear, talk, and smell
    • Specific vision abilities required by this job include close vision, peripheral vision, and the ability to adjust focus

We are an EEO Employer.

Category: Structural Fitter

Information
NOTE: The following description is a GENERAL Overview of this career and not a description of a particular job posting.

Structural Fitter will layout and fabricate metal structural parts such as plates, bulkheads, and frames within the hull of a vessel for riveting or welding. Structural Fitter use such tools as shears, punches, drill presses, bending rolls, bending slabs, furnaces, saws, and metal presses up to 750 tons. Also, Structural Fitter will need to be proficient in the use of Oxygen Acetylene cutting procedures and have the ability to tack weld. Typical layout work will consist of preparing plates for shearing, planning and bench planning, angles for punching and shearing, making collars, brackets for installation, furnaced plate, airports and manholes. Typical installation tasks will be deck ladders, fittings for riggings, mooring equipment ventilating equipment, oil-tight hatches, dry cargo hatches and braces, king posts and masts, engine room floor plates, engine room grating, shell castings, stern frames, anchor handling, and stem casting. Fabrication assignments may consists of plumbing a transverse bulkhead, lifting a shell frame from a vessel, construction of and/or duplicating structural parts. The Structural Fitter is familiar with such equipment as hydraulic jacks and pumps, steamboat ratchets, strongbacks, yokes, dogs and wedges, pneumatic tools and chalk lines.
Education
Most Structural Fitter careers require training in vocational schools, related on-the-job experience, and/or an associate's degree. A recognized apprenticeship program may be associated with these occupations.
Qualifications
Previous work-related skill, knowledge, and/or experience is required for these occupations, particularly in the use of career-related tools and work in a marine setting.

Pay Range

$25 – $39

Company Information

Advanced Integrated Technologies, LLC
2427 Ingleside Road
Norfolk, VA 23513
Phone: 757-813-7035

Application Information

2427 Ingleside Road
Norfolk, VA 23513