« Back to Jobs

FSG Master Tradesperson 3 (Fabrication Shop Blaster/Mechanic) (28429BR)

Company Information

HII Fleet Support Group LLC
5200 W. Mercury Blvd. Suite 250
Newport News, VA 23605
Phone: 757-896-5556

Application Information

5200 W. Mercury Blvd. Suite 250
Newport News, VA 23605
Apply Here!
FSG Master Tradesperson 3 (Fabrication Shop Blaster/Mechanic) Chesapeake-Virginia-United States 28429BR External Job Description This position will primarily work out of our Woodlake Fabrication Shop location in Chesapeake, VA but will also travel locally to shipyards and military bases supporting the Marine Services Operation in fabrication and fleet modernization. With the understanding that tasking may require out of town travel for short durations up to 25% of the time. This is depending on contract awards and support required as per trade/skill set. Position Specifics: Candidate must have the following experience to qualify for this position. • Must have experience setting up, operating and maintaining industrial blasting equipment. • Must have prior experience in fabrication to include operation of standard power tools for finishing, grinding and polishing. • Must be able to obtain and maintain a Defense Biometric Identification System (DBIDS) ID card and at a minimum, a DoD CONFIDENTIAL security clearance. • Must be able to travel locally or out of area up to 25% of the time. Applies comprehensive understanding of production and processes toward completion of assignments. Responsible for interfacing with customers, managing subcontractors and ability to provide work direction to others. Performs a variety of complicated and non routine tasks. Develops and uses technical documents including controlled work packages, formal work processes and procedures, test documents, reports and task or trip reports. Schedules, reports and briefs customers and senior management. Performs duties outside of specialty in order to complete installation or work assignment. Must be able to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs. Able to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces. Able to perform other duties as required which may involve high heat, humidity, noise and dirty conditions, working aloft or over the sides of vessels. May ride ships at sea for extended periods. May require wearing a respirator. Travel may be required within and outside of the continental United States. Department/Cost Center 115 - FSG MMTS Busn Unit - 11500 - Marine Services Ops US Citizenship Required for this Position Yes Relocation Assistance No relocation assistance available Clearance Type Confidential Minimum Education High School Diploma/GED Shift 1st Schedule Full-time Travel Yes, 10%-25% of the time Basic Qualifications HS education or Trade School + 4 years of related experience. Prefer technical/professional certifications. Must provide own hand tools as designated per trades specialty. Preferred Qualifications • Experience with inventory control a plus • Mechanical experience on industrial equipment and maintenance of same preferred. • Forklift experience a plus. • Paint inspection experience a plus. • Paint and coatings applications by brush, roll and various spray techniques a plus Company Statement Huntington Ingalls Industries is America’s largest military shipbuilding company and a provider of professional services to partners in government and industry. For more than a century, HII’s Newport News and Ingalls shipbuilding divisions in Virginia and Mississippi have built more ships in more ship classes than any other U.S. naval shipbuilder. HII’s Technical Solutions division provides a wide range of professional services through its Fleet Support, Mission Driven Innovative Solutions, Nuclear & Environmental, and Oil & Gas groups. Headquartered in Newport News, Virginia, HII employs more than 40,000 people operating both domestically and internationally. EEO Statement Equal Opportunity Employer - Veterans/Disabled Welcome. U.S. citizenship required for most positions. Job Expires 06-Feb-2020

Category: Non Destructive Technician


Information
NOTE: The following description is a GENERAL Overview of this career and not a description of a particular job posting.

The main function of a Non-Destructive Testing Technician is to test the safety of structures, vehicles, or vessels using x-ray, ultrasound, fiber optic or related equipment. An NDT would use visual, penetrant, magnetic particle, ultrasonic, x-ray, eddy current testing, or other non-destructive methods to inspect a structure or part (for instance, a sample weld) to ensure it meets specific standards or specifications. These tests are performed without damaging the structure or part, and are done to ensure that the tested area contains no defects that would prevent the sample weld, structure or part from performing as expected or failing outright.

Tools used to perform these tests include oscilloscopes, radiation detectors, remote reading thermometers, voltage meters, and x-ray or radiography equipment. A career in Non-Destructive Testing would require knowledge of the practical application of engineering, science, and technology, and may require previous experience with analytical, scientific, and computer aided design software.
Education
Most Non-Destructive Technician careers require a high school diploma, as well as training in vocational schools, related on-the-job experience, and/or an associate's degree.
Qualifications
Non-Destructive Testing careers typically require the ability to:
- Obtain (and/or re-certify) a visual, penetrant, and magnetic particle testing certification
- Obtain security clearance and military contractor badge
- Pass a drug test
- Be reliable and punctual

Previous experience, particularly with necessary career-related tools and software, is often required.